-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Estimated reading time: 3 minutes
The Shaughnessy Report: A Clearer Image
Out of all the process steps in a fabrication cycle, imaging may be the most critical. This is where the design begins to take a physical shape, where the theoretical world meets the physical world.
Much like photography, PCB imaging is a nearly magical process. I’ll bet the first technologists to use a Gerber Science photoplotter to create a PCB felt a lot like Nicéphore Niépce and Louis Daguerre, trying to coax a Daguerreotype photograph into life in the 1830s.
The primary method of imaging has evolved quite a bit over the last six or seven decades, from screening to liquid photoresist to dry film and then to aqueous dry film. Now laser direct imaging has created a world of possibilities that were unthinkable with film.
Despite all the advantages of direct imaging, the equipment is expensive—nearly seven figures—and there’s no automated DI system for lower-volume fabricators. Nor is there a “turnkey” DI system available yet. You may wind up buying a DI machine from one company and the supporting software from another.
Yes, the “old-school” film imaging systems have a big advantage over DI: They’re completely automated. Will DI ever replace film imaging completely? Probably not in my lifetime.
Some smaller shops may send this job through a 20-year-old etcher. Your system is only as strong as its weakest link; the best imaging process in the world is still dependent on your shop’s printing, etching, plating, and drilling.
Customers are becoming more educated about the capabilities and hurdles related to imaging. They often want to see straight sidewalls, not trapezoidal, that mSAP has made a reality. Straight sidewalls on traces offer a variety of benefits, including interference reduction, and they just look better, don’t they? (Admit it: The beauty contest among your co-workers is real.)
The old axiom says, “It’s all relative.” We’re primarily speaking of the North American fabrication market, which is made up of low- and medium-volume fabricators. These companies are barely an afterthought for the big imaging equipment makers serving the Asian high-volume market. To the big imaging equipment makers, North American fabs are “the little guys.” Keep that in mind.
As we see in this month's issue of PCB007 Magazine, there are still plenty of variables to deal with in imaging, making solid data collection and analysis practices a must. Several of this month’s contributors point out the many ways to get burned by trusting your gut instinct instead of your imaging data. Cost, yield, and quality all depend on a fabricator’s ability to collect and interpret data.
So, in this issue, our experts will discuss ways for the readers to fine-tune their imaging process by understanding how printing, etching, plating, and imaging all work together. We start out with a great interview with Loren Davidson of TTM Chippewa Falls, who explains his medium-volume facility’s imaging processes, and why it’s so important to let the data drive all your decisions. Happy Holden’s column focuses on laser direct imaging—its advantages and its disadvantages. Chris Bonsell of Chemcut discusses how to optimize your etcher for better imaging results. Alexandre Camus, Damien Boureau, and Alexis Guilbert of Altix bring us an article that compares the pros and cons of web and digital imaging systems. And Mivatek’s Brendan Hogan provides the five top priorities for implementing a DI system.
We also have columns from our contributors Travis Kelly, George Milad, Hannah Nelson, Mike Carano, Steve Williams, Christopher Bonsell, and Todd Kolmodin. And don’t miss the interview with Atotech’s Stefan Stefanescu, who discusses the company’s latest suite of control software for wet processes.
We have a busy trade show season coming up. I hope to meet with some of you on the road. See you next month.
Preview or download your PDF copy of the October issue of PCB007 Magazine today!
More Columns from The Shaughnessy Report
The Shaughnessy Report: Design Takes Center Stage at IPC APEX EXPOThe Shaughnessy Report: The Myriad Opportunities—and Challenges
The Shaughnessy Report: In Bed With Embedded
The Shaughnessy Report: Pulling Together
The Shaughnessy Report: The Winds of Change
The Shaughnessy Report: Trace Oddity
The Shaughnessy Report: Simply Speaking
The Shaughnessy Report: Exploring High-reliability Fabrication