Challenges in Modern PCB Design and Analysis
September 5, 2023 | Steve Watt, ZukenEstimated reading time: 1 minute
Navigating the complex landscape of modern PCB design presents numerous challenges for designers and the processes they use. Concerns about time to market, performance, system-level design, requirements, costs, and staffing are driving forces that shape the evolution of the modern PCB industry.
Zuken recognizes the need to address innovation in all areas of the design process while remaining responsive to customer-driven requirements. While we can make predictions about various challenges, concerns, and requirements, our customers play a vital role in shaping the company’s development direction. They have the benefit of being “in the trenches,” so to speak, on a daily basis, so they are the subject matter experts and can help identify gaps in our tools based on where their processes are heading.
System-level Analysis
The new era of electronic systems is characterized by increasing complexity. The demand for higher data rates, lower power consumption, and smaller form factors drive this surge in complexity. As a result, the challenges of managing signal integrity (SI), power integrity (PI), and electromagnetic interference (EMI) are also increasing.
To tackle these challenges, performing system-level SI, PI, and EMI analysis is imperative. This means the entire system must be considered, including different boards, cables, and other components. This comprehensive approach allows engineers to identify and address SI and PI problems before they lead to potential system failures. Engineers can proactively mitigate SI, PI, and EMI problems by delving into system-level analysis, which ensures robust system performance.
To read this entire article, which appeared in the August 2023 issue of Design007 Magazine, click here.
Suggested Items
Airbus Achieves Eurodrone’s Preliminary Design Review
05/16/2024 | AirbusThe Eurodrone programme has successfully performed the Preliminary Design Review (PDR). Led by Airbus Defence and Space as prime contractor, this major programme milestone has been completed with OCCAR and representatives of the four customer nations (France, Germany, Italy and Spain) in the presence of the three Major Sub-Contractors (MSC), Airbus Defence and Space Spain, Dassault Aviation and Leonardo.
A Review of the 2024 Del Mar Electronics and Manufacturing Show
05/16/2024 | Barry Matties, I-Connect007The Del Mar Electronics and Manufacturing Show (DMEMS) in Del Mar, California, recently took place at an unlikely venue: the Del Mar Fairgrounds. Doug Bodenstab, founder and show organizer, says the show covers everything in electronics manufacturing: design tools, components, base materials, training, testing, board fabrication, AI, data analytics, and more. While you can find about anything online these days, Bodenstab adds that there is no substitute for meeting people in person.
TactoTek Licenses IMSE Technology to Polestar for Sustainable Electronics Design Innovation
05/15/2024 | TactoTekPolestar, the Swedish electric performance car brand, and Finnish smart surface pioneer TactoTek, have entered a collaboration to explore integration of Injection Molded Structural Electronics (IMSE) technology into Polestar’s vehicle programs.
The Shaughnessy Report: Unlock Your High-speed Material Constraints
05/15/2024 | Andy Shaughnessy -- Column: The Shaughnessy ReportThe world of PCB materials used to be a fairly simple one. It was divided into two groups: the “traditional” laminates, often called FR-4, and the high-speed laminates developed especially for high-speed PCBs. These were two worlds that usually didn’t collide. But then traditional laminates started getting better, and high-speed designers and design engineers took notice and started to reconsider what FR-4 could be used for.
Standard of Excellence: Collaboration—The Right Path to Innovation
05/15/2024 | Anaya Vardya -- Column: Standard of ExcellenceNow more than ever, as new and innovative technologies for printed circuit boards are in demand, we need collaboration between PCB designers, fabricators, and assemblers. Close partnerships with PCB designers and assemblers are key to developing and producing PCBs with boards with new and innovative technology. These collaborative partnerships, along with the partnership with the end customers, are more critical than ever before.