-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
February 2, 2024 | Andy Shaughnessy, I-Connect007Estimated reading time: 2 minutes
I’m writing this in Santa Clara, California on the last day of DesignCon. It was nice to get out of Atlanta, which was 28 degrees when I left. It’s a little rainy here, but it’s been in the 60s all week, and I’ll take that kind of weather any day.
In this week’s must-reads, we have a little bit of everything, including sad news about the passing of our columnist Michael Ford. Everyone who knew him just loved the guy.
I need to catch an Uber, so I’m keeping this short. Have a good weekend.
Rain or Shine, DesignCon 2024 is Happening
Published February 1
Yes, DesignCon seems to be a draw, regardless of weather. This show was busier than a one-armed paper-hanger, despite intermittent rain. It was great to see so many young people at this show. Is this industry becoming cool again? Everyone I met was bullish on their company and the industry overall. Let’s hope this is good omen for the rest of the year.
The Pulse: New Designer’s (Partial) Guide to Fabrication
Published January 31
What do designers need to know about fabrication? They don’t necessarily have to be manufacturing experts, but the more they know about fab processes, the more likely they’ll produce successful designs. Columnist Martyn Gaudion breaks down the manufacturing considerations that can affect the design’s signal integrity.
The New Chapter: Easing the Learning Curve for Young Professionals
Published January 31
Now that young people are once again entering the world of PCB design and manufacturing, many companies are focusing on updating their onboarding processes. In this column, Paige Fiet—out of college for only a few years—shares her thoughts on ways that companies can shorten the learning curve for new engineers, leaving them less anxious and more productive.
Electronics Industry Mourns Loss of Colleague and Visionary Michael Ford
Published January 31
We lost a really great guy this week. Michael Ford was an industry expert on everything related to CFX, Industry 4.0, and Smart manufacturing, and one of our most popular columnists. After he left Siemens for Aegis Software, one of the Siemens engineers joked that it might take two people to replace Michael. But more importantly, he was also a really nice guy, and a lot of fun. He enjoyed sharing his knowledge to make the industry a better place. Michael will be missed.
It’s Only Common Sense: What Are You Afraid Of?
Published January 29
In this column, Dan Beaulieu gets right to the point: What are you afraid of? Smart company managers are not afraid to take necessary risks, but some PCB companies are run by managers who are almost paralyzed with fear. As Dan says, get over your fear and take that risk; you’re actually more likely to fail if you don’t get over that fear. What are you afraid of, anyway?
Suggested Items
TTM Technologies Reports First Quarter 2024 Results
05/02/2024 | TTM TechnologiesTTM Technologies, Inc., a leading global manufacturer of technology solutions including mission systems, radio frequency components and RF microwave/microelectronic assemblies, quick-turn and technologically advanced printed circuit boards , reported results for the first quarter 2024, which ended on April 1, 2024.
GPV’s Q1 2024 Interim Financial Report Shows Strong Navigation in Uncertain Times
05/01/2024 | GPVDanish-based GPV recorded an expected drop in sales to DKK 2.3 billion for the first quarter of 2024. The decline also affected the operating profit, which was DKK 155 million compared to DKK 179 million in the same quarter last year, although the EBITDA margin was maintained. In general, demand has been softer in 2024, but GPV continues to invest for the long-term and expects the trend to turn in the second half of 2024.
Danfoss Awarded Scanfil
05/01/2024 | ScanfilScanfil received an award from Danfoss in regards of delivery performance, quality, and customer service. We are honored to receive this award.
Celestica Announces Q1 2024 Financial Results
05/01/2024 | CelesticaCelestica Inc., a leader in design, manufacturing, hardware platform and supply chain solutions for the world's most innovative companies, today announced financial results for the quarter ended March 31, 2024 (Q1 2024).
The Knowledge Base: A CM’s Perspective on Box Build Practices
04/30/2024 | Mike Konrad -- Column: The Knowledge BaseIn the ever-evolving landscape of electronics manufacturing, the box-build process stands out as a critical phase that bridges the gap between individual component manufacturing and the delivery of a fully functional electronic system. This intricate procedure, encompassing the assembly of everything from PCBs to wire harnesses and mechanical enclosures, demands a high level of precision, efficiency, and innovation. As the electronics assembly industry expands and diversifies, understanding the best practices within box-build assembly has become paramount for manufacturers aiming to stay ahead in a competitive market.