-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
The Fabricator’s Guide to IPC APEX EXPO
This issue previews many of the important events taking place at this year's show and highlights some changes and opportunities. So, buckle up. We are counting down to IPC APEX EXPO 2024.
Getting to Know Your Designer
In this issue, we examine how fabs work with their design customers, educating them on the critical elements of fabrication needed to be successful, as well as the many tradeoffs involved. How well do you really know your customer? What makes for a closer, more synchronized working relationship?
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
Three Industry Giants From WKK Gather Around for Discussion
December 10, 2014 | Barry Matties, I-Connect007Estimated reading time: 17 minutes
During the recent HKPCA show I had the opportunity to catch up with Hamed El-Abd, Lionel Fullwood, and Gene Weiner. Our discussion covered an array of topics, from politics to new PCB factories and what it takes to stay competitive. Below is the transcription from our conversation.
007: Here with me today is Hamed El-Abd, Lionel Fullwood and Gene Weiner from WKK, welcome guys.
GW: Barry, it’s good to see you again in China, the number one economy in the world as of this quarter.
007: Thank you, and that’s what I’ve read just this morning.
GW: And that is clearly because of numbers, not because of technology. The leading technology here is still coming in from the foreigners, including the Taiwanese, who are classed as foreigner.
007: Gene you’ve been coming to China for many years now, correct?
GW: Since 1983.
007: One of the things that strikes me is the amount of change that has happened in just the last five years in particular. What changes have you seen and what’s your opinion on it?
GW: Well with the change a lot of it is superficial. Much of it is a new younger government tightening up, and much of it is from a stronger economic position globally and a stronger military. The Chinese have put themselves in a position to be a power player, if not the power player in the world. They’re still copying, copying, copying and not paying much attention to specs. Mostly it’s homegrown products for homegrown companies, with the best technology still coming from Europe, the U.S., Japan and Taiwan. From Taiwan I would say it’s the application of the technology improvements done by ITRI, their government sponsored research, as well as their major companies.
007: In comparison to the U.S., where obviously you've spent a lot of time, what do you see happening from your point of view?
GW: The U.S. is struggling to maintain a position with a government that appears confused with economic, domestic, and foreign policies. However, quietly happening in the U.S., and not for volume but for technology, we're seeing some great advances in R&D in chips, packages, chipsets, as well as the quiet building of new automated factories in captive shops not publicly known. Lockheed has three in-house printed circuit shops and the public thinks there's only one. It’s now become an open secret that Intel is building a shop in Chandler. Two weeks ago Lionel and I visited Whelen’s new factory in New Hampshire and it’s the first fully automated new printed circuit shop in North America—and I really mean fully automated. The only things that were not part of the automation line was a separate semi-automatic layup set-up and multilayer pressing line by Burkle, an offline ENIG electroless nicke/gold and a plasma machine. Everything else was inline, automated, with a very modern design. Instead of treating the air and water of the entire building they use semiconductor techniques with tunnels around the equipment, making it easier to maintain the environment, and they didn't have to get one single permit for waste treatment because the plant is almost 100% total recycle of air, fumes, and liquid. Copper is plated out of the spent etchant, the ammonia is recaptured and put back in—it was amazing. And we were watching the first runs of 100 panel lots when we were there, and Lionel is doing some evaluation of some new imaging equipment which we can't give you the details on until perhaps spring.
007: Are they in production now?Page 1 of 3
Suggested Items
Trouble in Your Tank: Supporting IC Substrates and Advanced Packaging, Part 5
03/19/2024 | Michael Carano -- Column: Trouble in Your TankDirect metallization systems based on conductive graphite or carbon dispersion are quickly gaining acceptance worldwide. Indeed, the environmental and productivity gains one can achieve with these processes are outstanding. In today’s highly competitive and litigious environment, direct metallization reduces costs associated with compliance, waste treatment, and legal issues related to chemical exposure. What makes these processes leaders in the direct metallization space?
AT&S Shines with Purest Copper on World Recycling Day
03/18/2024 | AT&SThe Styrian microelectronics specialist AT&S is taking World Recycling Day as an opportunity to review the progress that has been made in recent months at its sites around the world in terms of the efficient use of resources:
Matrix to Exhibit at IPC APEX EXPO 2024 in Anaheim, CA
03/05/2024 | MatrixMatrix will be exhibiting at IPC APEX EXPO 2024, to be held on April 9-12, 2024, at the Anaheim Convention Center, Anaheim, CA.
The Chemical Connection: Getting to Know Your Vendor
02/16/2024 | Don Ball -- Column: The Chemical ConnectionAfter working for a capital equipment supplier for almost 50 years, I’ve found that the most important part of getting to know your vendor is good communication among all parties. While contact between fabricators of a constantly changing product line and the designers of those products may occur daily or weekly, conversations between you and your equipment supplier may be years apart. That lengthy gap often means that previous contacts may have been promoted, retired, or moved on to other opportunities. You may have also migrated to a new supplier with whom you have little or no history. In either case, you will be interacting with someone you are unfamiliar with (as they are with you). Therefore, it is essential for both sides to communicate clearly so expectations will align.
EIPC Winter Conference 2024, Day 2: A Closer Look at Global Trends
02/14/2024 | Pete Starkey, I-Connect007The opening session of the second day’s conference proceedings focused on global PCB trends and was introduced and moderated by Dr. Michele Stampanoni, vice president of strategic sales and business development at Cicor Group in Switzerland. He opened the session with Dr. Hayao Nakahara’s knowledgeable and enlightening video presentation on the IC substrates industry.