-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Estimated reading time: 1 minute
10 Fundamental Rules of High-Speed PCB Design, Part 5
The final part of the 10 fundamental rules of high-speed PCB design focuses on board-level simulation encompassing signal integrity, crosstalk, and electromagnetic compliancy. Typically, a high-speed digital design takes three iterations to develop a working product. However, today, the product life cycle is very short, and therefore, time to market is of the essence. The cost per iteration should not only include engineering time but also consider the cost of delaying the products market launch. This missed opportunity could cost millions. Also, if an issue is not caught in the design phase and slips to through production and into the field, it could possibly damage a company’s reputation.
Unfortunately, simulation is often engaged towards the end of the design cycle. Ideally, the simulation should be done during the design process as part of standard practice. However, post-layout simulation is still necessary to validate the final signal and power integrity.
Board-level simulation cuts costs and a pre-layout simulation identifies issues in the conceptual stage so that they can easily be avoided. Post-layout simulation catches the issues during the design process, eliminating the potentially disastrous final stage changes.
VIII. Run the Post-layout Simulation
Simulate critical signals and match signal propagation and timing. Check for signal ringing and eye jitter.
The eye diagram is a common indicator of the quality of a signal in high-speed digital transmission lines. In an ideal world, eye diagrams would look like rectangular boxes. In reality, data transmission is imperfect, so the transitions of the bit pattern do not perfectly align on top of each other, and an eye-shaped pattern results. An open-eye pattern with little jitter (horizontal disparity) and noise (vertical deviation) is the objective.
To read this entire column, which appeared in the January 2019 issue of Design007 Magazine, click here.
More Columns from Beyond Design
Beyond Design: The Art of Presenting PCB Design CoursesBeyond Design: Embedded Capacitance Material
Beyond Design: Return Path Optimization
Beyond Design: Just a Matter of Time
Beyond Design: Design Success with IPC Standards
Beyond Design: Integrating AI Into PCB Design Flow
Beyond Design: Standing Waves in Multilayer PCB Plane Cavities
Beyond Design: Balancing Trade-offs for Optimal PCB Design