-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Mobility Lab Helps Fight Motion Sickness in Self-Driving Cars
July 2, 2019 | Eindhoven University of TechnologyEstimated reading time: 3 minutes
Autonomous cars are safer to drive and offer passengers the opportunity to relax, sit back and enjoy while being transported to their destination. There is a drawback, though. Many people experience motion sickness when reading or watching a movie in a moving car.
Image Caption: The Vibrotactile Display with Active Movement Mechanism (VDAM) combines vibrations in the forearm and through moveable plates in the chair
Two Malaysian researchers at the faculty of Industrial Design of the Eindhoven University of Technology, Nidzamuddin Md. Yusof and Juffrizal Karjanto, have found ways to alleviate this problem by increasing the so-called passengers’ situational awareness. To test their solution they built a Mobility Lab, a special car outfitted with instruments that simulates an autonomous car. Md. Yusof and Karjanto will defend their dissertations on July 3th and 4th at the TU/e.
In a fully automated vehicle, human drivers become passengers. While the car handles all driving tasks and decisions, they have the freedom to engage in work, socializing or leisure activities. However, once involved in non-driving tasks, people tend to become unaware of the intentions of the vehicle. As a result, they are unprepared for the forces generated from acceleration, braking or turning. For many people this leads to motion sickness, a serious problem that may hamper the further development of self-driving cars.
This may be solved by letting autonomous cars drive in a more defensive manner, avoiding abrupt changes in direction or speed. However, in an urban environment with many junctions and corners, this is not a solution.
Mobility Lab
To provide a better alternative, the two researchers developed four non-intrusive devices that inform the passenger about his whereabouts without the need to look outside. Two devices provided peripheral information through a visual display, the other two through haptic feedback. They tested their devices in a specially outfitted car, the Mobility Lab, that simulates an automated car in real life. This provided them with much more relevant results than traditional simulators.
Peripheral visual feedforward system (PVFS): (left) Positioning inside the Mobility Lab; (right) Light moving from bottom to top on the right side to indicate that the fully automated vehicle is about to turn to the right.
The devices were tested on around 20 passengers each, with every participant undergoing three separate one-hour sessions where they had to either watch a movie or read a book on a tablet. The results show that all four systems increased the situation awareness of the participants. Two devices also managed to reduce symptoms of motion sickness: the Peripheral Visual Feedforward System (PVFS) (for participants who watched a movie), and the Vibrotactile Display with Active Movement Mechanism (VDAM) (for participants who read a book on a tablet).
The PVFS consists of two rows of 32 LED lights left and right of the movie screen, that inform the passenger in an unobtrusive way of the intended turn of the car. The VDAM conveys information about the car’s intentions by vibrations in the forearm and through moveable plates in the chair.
Future Design
The researchers hope their work contributes to the design of future interfaces inside the interiors of automated vehicles. “We mainly focused on the vehicle’s technology and its impact on motion sickness, but the development of a sustainable product should also take into account the passengers’ comfort and experience. This requires the input from different educational and experience backgrounds.”
The Mobility Lab will remain at the Department of Industrial Design in the TU/e, and will be used for further research into the design of self-driving cars. In addition, an identical version of the Mobility Lab will be developed at the Universiti Teknikal Malaysia Melaka, with collaboration from TU/e, focusing on Asian users.
Suggested Items
Real Time with… IPC APEX EXPO 2024: Magnalytix's Services and Trends in the Electronics Industry
05/10/2024 | Real Time with...IPC APEX EXPOMike Bixenman, president of Magnalytix, explains Magnalytix's services, including third-party validation, test boards, electrical testing, and comprehensive reports. He also discusses emerging trends such as power electronics and reliability. Standards and design improvements also form part of this conversation.
Podcast Review: On the Line with… Designing for Reality
05/09/2024 | Duane Benson, Positive Edge LLCAs a technologist, if I were forced to come up with just one recurring theme that I might call a professional “nemesis,” it would be the difference between theory and reality. A lot of technology we have at our disposal works well in theory but falls short when reality hits. That’s not the only reason I chose to listen to and review On the Line with… Designing for Reality, featuring a series of conversations with ASC Sunstone’s Matt Stevenson, but it certainly helped that the title caught my eye.
EMA Webinar: Next Generation MCAD/ECAD for SOLIDWORKS
05/09/2024 | EMA Design AutomationLearn how the MCAD and ECAD experts at Hawk Ridge and EMA can help you solve your MCAD/ECAD integration challenges with this unique collaboration environment.
Sondrel Awarded New Video Processor ASIC Design and Supply Contract
05/09/2024 | SondrelSondrel, a leading provider of ultra-complex custom chips for leading global technology brands, is pleased to announce that it has won a major ASIC design and supply contract for a next generation, video processing chip.
Connect the Dots: Designing for Reality—The Pre-Manufacturing Process
05/08/2024 | Matt Stevenson -- Column: Connect the DotsI have been working with Nolan Johnson on a podcast series about designing PCBs for the reality of manufacturing. By sharing lessons learned over a long career in the PCB industry, we hope to shorten learning curves and help designers produce better boards with less hassle and rework. Episode 2 deals with the electronic pre-manufacturing process. Moving from CAD (computer-aided design) to CAM (computer-aided manufacturing) is a key step in PCB manufacturing. CAM turns digital designs into instructions that machines can use to actually build the PCB.