iNEMI Workshop: NIST 5G/6G mmWave Materials and Electrical Test Technology Roadmap
February 2, 2023 | iNEMIEstimated reading time: 1 minute
iNEMI, along with several industry and academic partners, is developing the 5G/6G mmWave Materials and Electrical Test Technology Roadmap (5G/6G MAESTRO) as part of NIST’s Advanced Manufacturing Technology (MfgTech) Roadmap. The goal of MAESTRO is to create a foundation of knowledge and expertise in the U.S. to support the development and manufacturing of leading edge 5G and 6G products.
Join iNEMI, Georgia Institute of Technology and Florida International University on February 9 for an introduction to the roadmap creation and a status update from Urmi Ray (iNEMI), Principal Investigator, along with highlights of progress made to date:
- Identification of Next-Generation Materials and Testing Needs — a status report on dielectric properties together with suggestions about where work is needed to move into the 5G and 6G bands, presented by David Citrin (Georgia Institute of Technology).
- mmWave System Design Analysis/Trends and Recommendations — key advances in system architectures and package integration that will enable future mmWave systems, presented by Raj Pulugurtha (Florida International University).
Registration
Advance registration is required. If you have any questions or need additional information about MAESTRO, please contact Urmi Ray (urmi.ray@inemi.org). Get additional workshop details on iNEMI’s website.
Thursday, February 9, 2023
9:00-10:30 a.m. PST (US)
12:00-1:30 p.m. EST (US)
6:00-7:30 p.m. CST (Europe)
Suggested Items
Latest Test and Inspection Solutions from GOEPEL electronic at SMTconnect 2024
04/29/2024 | GOEPEL electronicGOEPEL electronic will be demonstrating automated test and inspection equipment at SMTconnect, taking place in Nuremberg from June 11 to 13, 2024.
SIA Commends CHIPS Act Incentives for Micron’s Manufacturing Projects in New York and Idaho
04/29/2024 | SIAThe Semiconductor Industry Association (SIA) today released the following statement from SIA President and CEO John Neuffer applauding semiconductor manufacturing incentives announced by the U.S. Department of Commerce and Micron.
Real Time with… IPC APEX EXPO 2024: Tools, Training, and Trends in Manufacturing Engineering
04/25/2024 | Real Time with...IPC APEX EXPOGuest Editor Kelly Dack and Product Specialist Erik Bateham of Polar Instruments discuss Polar's latest technology, including their role in aiding manufacturing engineers. They highlight the advanced capabilities of Polar's tools and the critical role of signal integrity analysis, as well as the importance of accurate modeling in board manufacturing. Polar's unique training approach and demonstration contact details are also explored.
TTM Celebrates the Grand Opening of Its First Manufacturing Facility in Penang
04/25/2024 | TTM Technologies, Inc.TTM Technologies, Inc., a leading global manufacturer of technology solutions including mission systems, radio frequency (RF) components and RF microwave/microelectronic assemblies, and quick-turn and technologically advanced printed circuit boards (PCBs), officially opened its first manufacturing plant in Penang, Malaysia with an investment of USD200 million (approximately RM958 million).
Listen Up! The Intricacies of PCB Drilling Detailed in New Podcast Episode
04/25/2024 | I-Connect007In episode 5 of the podcast series, On the Line With: Designing for Reality, Nolan Johnson and Matt Stevenson continue down the manufacturing process, this time focusing on the post-lamination drilling process for PCBs. Matt and Nolan delve into the intricacies of the PCB drilling process, highlighting the importance of hole quality, drill parameters, and design optimization to ensure smooth manufacturing. The conversation covers topics such as drill bit sizes, aspect ratios, vias, challenges in drilling, and ways to enhance efficiency in the drilling department.