Analog Devices Invests More Than $1 Billion in Semiconductor Facility Expansion in Oregon
July 28, 2023 | Analog Devices, Inc.Estimated reading time: 2 minutes
Analog Devices, Inc., a global semiconductor leader, celebrated its more than $1 billion investment to expand its semiconductor wafer fab in Beaverton, Oregon. The Beaverton site, built in 1978, is ADI’s largest wafer fabrication facility by volume and serves customers in critical industries, such as industrial, automotive, communications, consumer, and healthcare.
The facility investment expands cleanroom space to about 118,000 sq-ft and nearly doubles internal manufacturing of products running on the 180-nanometer technology node and above. It is also expected to create hundreds of new, long-term employment opportunities, a significant increase to ADI’s current roughly 950 employees in Oregon.
More than 10% of the total investment is for new, state-of-the-art fab tools intended to increase overall efficiency and utilize chemistries that are more environmentally friendly. Despite nearly doubling production output, the facility is targeting to reduce absolute greenhouse gas emissions by approximately 75% and water usage per production unit by approximately 50%.
"By expanding ADI’s Beaverton facility, we are increasing our production capacity in critical industries, boosting domestic manufacturing in line with the vision of the CHIPS Act, and enhancing the global resiliency of ADI’s hybrid manufacturing model," said Vincent Roche, ADI’s CEO and Chair. "While our investment in Beaverton will facilitate these goals, they will be achieved through the incredible dedication and talent of ADI's existing workforce and further tapping into Oregon's strong talent pool."
Commenting on the announcement, U.S. Senator Ron Wyden of Oregon said, “Today’s good news from Analog Devices marks a significant step to ensure Oregon is taking full advantage of the federal CHIPS Act I worked to pass into law. This announcement strengthens a signature industry in Oregon by solidifying semiconductors’ place in the Silicon Forest and beyond, creating statewide impact with new good-paying jobs in Beaverton and rippling out to benefit the entire state economy.”
In addition, the Beaverton facility will host the Semiconductor Advanced Manufacturing University (SAMU), a workforce development training center that will offer eight-week courses to train groups of around 25 students each on semiconductor equipment maintenance. A key driver of ADI’s efforts with the training center is providing training opportunities to many diverse groups within the local community, including U.S. military veterans, people re-entering the workforce, and existing ADI factory operators, to learn semiconductor manufacturing fundamentals and other curriculum to advance their professional development.
ADI’s hybrid manufacturing model is a broad network of internal factories and external partners. This model enables effective management of ADI operations through economic cycles, enhances the resiliency of its global supply chain, and better serves its customer needs. To improve ADI-owned operations, the company has increased capital investment to a high single-digit percent of revenue in fiscal year 2022 and to date in fiscal year 2023 from its historical precedent of around four percent. These manufacturing investments span the globe, including in the states of Washington and Massachusetts, as well as in Ireland, Thailand, Malaysia, and the Philippines.
Suggested Items
U.S. Companies Invest Heavily in Robots
04/30/2024 | IFRManufacturing companies in the United States have invested heavily in more automation: total installations of industrial robots rose by 12% and reached 44,303 units in 2023. Number one adopter is the car industry followed by the electrical and electronics sector.
Flex Receives Ericsson 2023 Supplier Sustainability Award
04/30/2024 | FlexEricsson recently awarded Flex with its 2023 Supplier Sustainability Award — the second time since 2021. The award recognizes the extended supply chain benefits from sustainable manufacturing operations in the Flex facility in Tczew, Poland, that runs on 100 percent renewable energy.
USPAE to Springboard U.S. Technology Forward
04/30/2024 | Marcy LaRont, PCB007 MagazineThe U.S. Partnership for Assured Electronics (USPAE) was launched as a nonprofit subsidiary of IPC in 2020, specifically to manage the DoD relationship and access to funding, and to develop a cooperative facility to develop UHDI capabilities in the U.S., not only for the defense sector, but for the whole of the U.S. electronics industry. It is a tall order, but industry veteran Joe O'Neil believes it will happen. Having been tasked with making the UHDI Capable Cooperative Production Facility (UCCPF) a reality, he provides an update on this important project for U.S. electronics manufacturing.
Real Time with… IPC APEX EXPO 2024: Insight into Summit Interconnect's Success
04/30/2024 | Real Time with...IPC APEX EXPOShane Whiteside, CEO of Summit Interconnect, discusses the company's recent recognition as one of the best PCB fabricators in the industry by receiving IPC's Peter Sarmanian award. Whiteside touches on the impact of changes in the marketplace, such as the Defense Production Act and presidential determination, on their growth. Whiteside also shares the company's focus on mechanical and data automation to enhance manufacturing processes and anticipates more automation and evolution in the industry.
Latest Test and Inspection Solutions from GOEPEL electronic at SMTconnect 2024
04/29/2024 | GOEPEL electronicGOEPEL electronic will be demonstrating automated test and inspection equipment at SMTconnect, taking place in Nuremberg from June 11 to 13, 2024.