DARPA Explores Additive Manufacturing’s Revolutionary Potential for Futuristic Microsystems
March 12, 2024 | DARPAEstimated reading time: 2 minutes
DARPA played a seminal role in establishing materials science as a discipline. One of the latest disruptive efforts in new materials and applications, the Additive Manufacturing of Microelectronic systEms (AMME) program, seeks to launch microsystems manufacturing far beyond today’s state of the art.
AMME takes aim at revolutionizing the manufacture of microsystems through technological breakthroughs in producing novel, multi-material microsystems at incredible speeds, volumes, and resolution. This additive manufacturing process would enhance commercial devices with innovative add-on technologies and create the ability to rapidly respond to mission requirements – innovations similar to additive manufacturing’s transformation of complex prototyping. With AMME, DARPA aims to overcome fundamental limits specifically for microsystems.
DARPA seeks groundbreaking advances in additive manufacturing by achieving a trifecta of material quality, high resolution, and massive print throughput. The goal of AMME will be to make it possible to create microsystems with new geometries that would be able to integrate mechanical, electrical, or biological subcomponents.
“AMME is inspired by new insights from selective material synthesis and volumetric additive manufacturing that would enable a new class of microsystems,” said Michael Sangillo, AMME program manager. “We want to remove design rules imposed by traditional manufacturing tools and demonstrate novel microsystem technologies that create new opportunities for national security and emerging applications.”
Today’s methods are hamstrung by the inherent tradeoffs between resolution and throughput of traditional manufacturing: such as precise 3D printing that may be ultra-high resolution but subject to low throughput, or volumetric printing that’s high throughput but limited to lower resolution and one material at a time. AMME researchers will work to simultaneously synthesize high-quality multi-materials at unprecedented resolution levels and throughputs.
This will require AMME performers to invent radically new approaches for 3D additive manufacturing of complex geometric microsystems. This includes creating precursor material combinations that allow for rapid, multi-material printing that is not possible today. An additional challenge will be creating a fabrication process capable of printing at sub-micron resolution and extremely fast speeds. If successful, AMME will print a penny-sized microsystem (with 500 nm resolution) in about three minutes.
“Our objective is to demonstrate a novel, functional microsystem that achieves additive manufacturing advances not possible today – advances like the ability for astronauts to make on-demand repairs in space,” Sangillo said. “AMME will also focus on the commercialization approach, so we can produce a manufacturing system that can be quickly adopted by the broader industrial community, including DOD and other U.S. government organizations.”
Suggested Items
Real Time with… IPC APEX EXPO 2024: Tools, Training, and Trends in Manufacturing Engineering
04/25/2024 | Real Time with...IPC APEX EXPOGuest Editor Kelly Dack and Product Specialist Erik Bateham of Polar Instruments discuss Polar's latest technology, including their role in aiding manufacturing engineers. They highlight the advanced capabilities of Polar's tools and the critical role of signal integrity analysis, as well as the importance of accurate modeling in board manufacturing. Polar's unique training approach and demonstration contact details are also explored.
TTM Celebrates the Grand Opening of Its First Manufacturing Facility in Penang
04/25/2024 | TTM Technologies, Inc.TTM Technologies, Inc., a leading global manufacturer of technology solutions including mission systems, radio frequency (RF) components and RF microwave/microelectronic assemblies, and quick-turn and technologically advanced printed circuit boards (PCBs), officially opened its first manufacturing plant in Penang, Malaysia with an investment of USD200 million (approximately RM958 million).
Listen Up! The Intricacies of PCB Drilling Detailed in New Podcast Episode
04/25/2024 | I-Connect007In episode 5 of the podcast series, On the Line With: Designing for Reality, Nolan Johnson and Matt Stevenson continue down the manufacturing process, this time focusing on the post-lamination drilling process for PCBs. Matt and Nolan delve into the intricacies of the PCB drilling process, highlighting the importance of hole quality, drill parameters, and design optimization to ensure smooth manufacturing. The conversation covers topics such as drill bit sizes, aspect ratios, vias, challenges in drilling, and ways to enhance efficiency in the drilling department.
Elevating PCB Design Engineering With IPC Programs
04/24/2024 | Cory Blaylock, IPCIn a monumental stride for the electronics manufacturing industry, IPC has successfully championed the recognition of the PCB Design Engineer as an official occupation by the U.S. Department of Labor (DOL). This pivotal achievement not only underscores the critical role of PCB design engineers within the technology landscape, but also marks the beginning of a transformative journey toward nurturing a robust, skilled workforce ready to propel our industry into the future.
Fujitsu, METRON Collaborate to Drive ESG Success
04/24/2024 | JCN NewswireFujitsu Limited and METRON SAS, a French cleantech company specializing in energy management solutions for industrial decarbonization, today announced a strategic initiative to contribute to the realization of carbon neutrality in the manufacturing industry.