Updatable Chips for a Safer Internet of Things
March 8, 2017 | Technical University of MunichEstimated reading time: 1 minute
Whether it's Industrie 4.0, self-driving cars or smart home solutions – connected machines and high-value goods need security mechanisms that can be updated. The objective of the ALESSIO research is to develop and assess these security mechanisms. In this projectunder the leadership of Infineon Technologies AG, The Technical University of Munich (TUM) collaborates with companies like Siemens AG and the Munich-based Fraunhofer Institute for Applied and Integrated Security.
Every new connected device in the Internet of Things is a potential target: sensitive data and information that are not sufficiently protected could be captured and used for further attacks.
This is why reliable protection for safety-critical information is based on a combination of software and hardware. The hardware – a security chip – is comparable to a safe: a highly protected area in which data and security keys are stored separately from the software. But due to the long life-span of industrial facilities e.g. manufacturers need to be able to respond to changed or new attack methods. Hence the data and security-relevant information in these devices and industrial plants have to be updatable.
Three Prototypes Will Demonstrate Feasibility
Within the next three years, the ALESSIO research partners will develop updatable security solutions for such embedded systems. One of the approaches is a conventional hardware-based Secure Element with updatable software. A Secure Element in complex, programmable logic devices (FPGA, field-programmable gate array) is also underway. In the end, three practice-oriented prototypes will show the solutions' feasibility and functional capabilities.
The project runs until the end of 2019 and is funded by the Federal Ministry of Education and Research with approximately Euro 3.9 million.
Suggested Items
Koh Young Showcases Award-winning Inspection Solutions at SMTconnect with SmartRep in Hall 4A.225
04/25/2024 | Koh Young TechnologyKoh Young Technology, the industry leader in True 3D measurement-based inspection solutions, will showcase an array of award-winning inspection and measurement solutions at SMTconnect alongside its sales partner, SmartRep, in booth 4A.225 at NürnbergMesse from June 11-13, 2023. The following offers a glimpse into what Koh Young will present at the tradeshow:
Book Excerpt: The Printed Circuit Assembler’s Guide to... Factory Analytics
04/24/2024 | I-Connect007 Editorial TeamIn our fast-changing, deeply competitive, and margin-tight industry, factory analytics can be the key to unlocking untapped improvements to guarantee a thriving business. On top of that, electronics manufacturers are facing a tremendous burden to do more with less. If you don't already have a copy of this book, what follows is an excerpt from the introduction chapter of 'The Printed Circuit Assembler’s Guide to... Factory Analytics: Unlocking Efficiency Through Data Insights' to whet your appetite.
Real Time with... IPC APEX EXPO 2024: Industrial Quality Solutions from Zeiss
04/23/2024 | Real Time with...IPC APEX EXPOEditor Nolan Johnson and Herminso Gomez of Zeiss Group discuss the company's industrial quality solutions, with a focus on X-ray technology. Zeiss provides a range of microscopy options and Herminso highlights the advantages of X-ray technology for aerospace, medical, and consumer electronics sectors.
Altair Acquires Cambridge Semantics, Powering Next-Generation Enterprise Data Fabrics and Generative AI
04/22/2024 | AltairAltair a global leader in computational intelligence, acquired Cambridge Semantics, a modern data fabric provider and creator of one of the industry’s leading analytical graph databases.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
04/19/2024 | Marcy LaRont, PCB007 MagazineFor my must-read picks of the week, I’m highlighting Parker Capers, a young professional seeking employment, solid counsel from Dan Beaulieu on what your post-show plan should look like, more information and insight on “chiplets” and the need for secure data transfer standards from columnist Preeya Kuray, as well as Matt Stevenson’s design for reality wisdom. It’s a reminder to download one of our newest books (there are several) you don't want to miss if you are an assembler.