Atotech to Present New Flex, Flex-Rigid Products at C’Tex 2018


Reading time ( words)

Atotech will showcase its latest production solutions for advanced HDI, flex, and flex-rigid PCBs in hall C1, booth AN6 at the C’Tex 2018 show. The trade show will be held in the Suzhou International Expo Center from May 16-18. Next to its product promotion at its trade show booth, the company takes part in the New Product Introduction sessions with the introduction of its new InPro THF chemistry.

On Thursday, May 17, from 2:00 to 2:40 pm, Mustafa Oezkoek, Global Product Manager for Panel and Pattern Plating at Atotech Deutschland GmbH, will present InPro THF for advanced HDI (mSAP). InPro THF provides reliable BMV filling performance at high current densities up to 3 A/dm² especially for mSAP applications in mass production. The process meets the technological and yield requirements for next generation HDI and packaging and provides pattern plating with excellent pattern distribution. It may also be used for TH filling and reduces the number of processing steps needed, thereby leading to improved reliability, productivity, and reduced costs. The three additive component system further provides excellent stability without the formation of harmful breakdown products. 

InPro THF: Current density: 3.0  A/dm², dimple < 3μm

Additional product highlights at Atotech’s booth will be Cupracid Flex / InPro Flex, an economic conformal plating solution for standard flex and rigid-flex applications, and Stanna-COF, an immersion tin for chip on film technology.

Cupracid Flex / InPro Flex

Cupracid Flex and InPro Flex are specifically designed for standard conformal flex applications. The Cupracid Flex process is for use in vertical systems with soluble anodes whereas InPro Flex can be used in systems with insoluble anodes. Even at higher current density, pattern uniformity and line shape are very good. Both processes consist of a simple two additive system and provide excellent throwing power at high current densities without any corner flattening.

Stanna-COF

Stanna-COF is the latest extension to Atotech’s already well versed immersion tin family. The application enables Chip On Film (COF) technology. With Stanna-COF, the chips are bonded straight onto the tracks necessitating a smooth and even finish. The process assures improved yields and functionality and allows for high volume reel to reel production. Stanna-COF has the potential to enhance fine line capability and provides a protective and functional final finish as demanded by this technology.

For further information on these new products, visitors to the show are invited to join Atotech’s New Product Introduction presentation or pass by the Atotech booth in hall C1 number AN6 during the C’Tex show from May 16 to 18. Local and international product specialists will be on site to discuss any question or inquiry.

About Atotech

Atotech is one of the world’s leading manufacturers of specialty chemicals and equipment for the printed circuit board, IC substrate and semiconductor industries, as well as for the decorative and functional surface finishing industries. Atotech has annual sales of USD1.2 billion (2017). The company is fully committed to sustainability – we develop technologies to minimize waste and to reduce environmental impact. Atotech has its headquarters in Berlin, Germany, and employs about 4,000 people in over 40 countries. About a quarter of all staff works in one of the four locations in Germany: Berlin, Feucht, Neuruppin, and Trebur. For more information, click here.

Share

Print


Suggested Items

Driving Down Cost with Process Engineering

04/20/2021 | I-Connect007 Editorial Team
Nolan Johnson, Barry Matties, and Happy Holden speak with Matt Mack, process engineer at ICM Controls. Matt shares a day in the life of a process engineer, along with how he approaches continuous improvement and planning for the future on the floor.

PCB Sourcing Using PCQR2

03/30/2021 | Al Block, Naji Norder, and Chris Joran, National Instruments
In a global market, it is often difficult to determine the best PCB suppliers for your technology needs, while also achieving the lowest costs for your products. Considering each PCB supplier has their own niche in terms of equipment, process, and performance, uniform test data from the IPC-9151D Process Capability, Quality, and Relative Reliability (PCQR2) Benchmark Test Standard can help find the right source for the board based on its specific technology requirements.

IPC APEX EXPO 2021 Keynote: Travis Hessman on ‘The Great Digital Transformation’

03/10/2021 | Pete Starkey, I-Connect007
Wednesday’s Premier Keynote at IPC APEX EXPO 2021 came from Travis Hessman, editor-in-chief of IndustryWeek, “a website and magazine dedicated to manufacturing leadership, operational excellence and the technologies that make it possible.” An energetic and animated presenter, a powerful storyteller and visibly passionate about digital manufacturing, Hessman made it clear at the outset that his goal was not to hype an already over-hyped industry, nor to focus on the technologies themselves, but to walk-through the process of transformation.



Copyright © 2021 I-Connect007. All rights reserved.