Flex Talk: Additive Electronics Momentum


Reading time ( words)

There is no denying that additive manufacturing processes have been gaining popularity over the past several years. We have additive manufacturing conferences, journals, and no end to continued research and development. Additive electronics, a segment of this technology, has also been growing in popularity, and there are several alternatives on the market that cater to quick-turn, prototype, and PCB options.

Digging down into the additive electronics market, there is another important segment that is starting to build momentum: the fabrication of feature sizes bridging subtractive etch processing capabilities and IC-scale technology. Fully additive, semi-additive (SAP), or modified semi-additive processes (mSAP) enable fabricators to create PCBs, on flex or rigid materials, with much finer feature sizes than the traditional subtractive etch processes can manufacture while also working with larger panel sizes than typical IC fabrication. While the concept of additive electronics is not new, it is new technology in terms of PCB manufacturing.

dunn_molded-additive_hero.jpgI have been involved with additive electronics for the past several years, and I have seen the discussion of and demand for sub-75-micron feature sizes slowly grow. Conversations, questions, and research about SAP and mSAP increased significantly when it was announced that the mSAP process was used to create the circuitry in the more recent versions of our smartphones. While this process is available in very high volume in some areas of the world, it is still in the early stages of development in other areas.

In smartphone applications, it is easy to see the benefit of 35-micron line and space and the ability to shrink the circuit size to allow space for a larger battery and more sophisticated electronics. As a smartphone user, I know I appreciate that larger battery! But even outside of the high-volume smartphone market, there is an increased interest in the ability to design with feature sizes below 75 microns and, along with that, there is an increased interest in what options are available in low-volume and development quantities to achieve this. While working with the SMTA to help develop a new conference launching this fall, “Additive Electronics: PCB Scale to IC Scale,” it has be-come clear that the industry is at an inflection point. Increasingly sophisticated electronics in smaller and lighter-weight packaging will continue to drive the need to deliver finer feature sizes, leaving designers with the need to identify potential solutions and provide fabricators with the opportunity to bring in new capabilities to meet this need.

One of the forerunners in this technology advancement is Averatek’s A-SAP process. Averatek has created a liquid metal ink (LMI) and semi-additive manufacturing processes that are capable of achieving feature sizes from 75 down to 5 microns. This technology is available for license to PCB facilities and fits well with traditional PCB manufacturing equipment. Currently, the A-SAP process is being piloted in two PCB fabrication facilities and will be commercially available over the next few months.

To read this entire column, which appeared in the October 2019 issue of PCB007 Magazine, click here.

Share

Print


Suggested Items

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

04/16/2021 | Nolan Johnson, I-Connect007
I’m sure it’s just me being hyperaware, but I can’t shake it: Mars is where it’s at right now. Is it just me, or do you get the same feeling from the news? There are the Mars rovers—three generations of them still rolling, now—and a drone helicopter winding up for a maiden flight any day now. But that’s not all. There’s SpaceX’s StarShip, rapid-prototyping its way into a manned flight to Mars. And NASA’s whole “return to the Moon” project is simply a shakedown for the U.S. government contractors’ Mars flight hardware, too.

Top Five Takeaways from IPC APEX EXPO 2021

04/15/2021 | Chris Mitchell, IPC VP, Global Government Relations
IPC APEX EXPO 2021, which went all virtual this year, exemplified how the electronics industry has responded to the COVID-19 global pandemic: with resiliency, agility, and an unwavering commitment to build electronics better. APEX EXPO featured great content and robust discussions on topics of critical importance to the global electronics industry. From my vantage point leading IPC’s government relations programs, here are my top five takeaways from this year’s event.

IPC Supporting Newcomers in the Industry: Notes from IPC APEX EXPO 2021

04/01/2021 | Marc Carter, Aeromarc
With the wrap-up of IPC APEX EXPO 2021, it was extremely gratifying to note the emphasis placed on getting young people involved to combat the “graying out” knowledge losses facing our industry. A part of that emphasis was reflected in the award ceremony on Tuesday, March 9, which featured some people you may have seen mentioned in my “Better to Light a Candle” columns.



Copyright © 2021 I-Connect007. All rights reserved.