Researchers to Develop Made-to-Measure 3D Laser Beams
July 1, 2021 | Heriot-Watt UniversityEstimated reading time: 3 minutes
Researchers at the National Robotarium, hosted by Heriot-Watt University, have secured £586,000 to develop 3D laser beams whose shape can be changed.
The innovation is set to transform the manufacturing and healthcare technology industries, making it easier and cheaper to produce products that require highly-precise manufacturing, such as medical equipment and mobile devices.
The funding from the Engineering and Physical Sciences Research Council (EPSRC), part of UK Research and Innovation, will support the development of the lasers for industry application, accelerating the commercialisation of the technology for the benefit of businesses.
Lasers are a crucial component of modern manufacturing, with the global laser processing market projected to grow from £2.8 billion in 2020 to £4.1 billion by 2025. They are used widely by industry to produce precise incisions and mould materials into specific shapes.
However, this approach to laser-based manufacturing depends on melting or vaporising the material, which means the laser’s energy must be focussed on the right points. The standard laser beam shape makes it difficult to tailor this for specific manufacturing processes, decreasing efficiency and limiting what can be made.
The research to be undertaken at the National Robotarium will develop laser beams which have been specifically designed to meet the exact manufacturing requirements of products, improving efficiency and precision.
The National Robotarium is supported by £21 million from the UK Government and £1.4 million from the Scottish Government as part of the £1.3 billion Edinburgh and South East Scotland City Region Deal - a 15 year investment programme jointly funded by both governments and regional partners.
UK Government Minister for Scotland Iain Stewart said: "This is cutting-edge technology in every sense of the phrase. These 3D lasers are set to unlock previously unheard of levels of precision and so transform our manufacturing and medical technology industries, boosting the UK's global reputation for innovation and attracting jobs and further investment.
"This exciting research is being supported both by a £586,000 UK Research and Innovation grant, and our £21 million investment in the National Robotarium through the Edinburgh City Region Deal."
The Scottish Government’s Cabinet Secretary for Finance and the Economy Kate Forbes said: “I’m very pleased to hear this cutting-edge research will be carried out at the National Robotarium, which is funded through the Edinburgh and South East Scotland City Region Deal, and that it will have a direct impact on our world-leading manufacturing industries.
“This is a crucial time for business, trade and investment in Scotland. City Region and Growth Deals have a key role to play in our economic recovery from the pandemic as we work towards a fairer and more inclusive Scotland. Our £300 million commitment to the Edinburgh and South East Scotland City Region Deal will enable much needed investment in transport, housing, culture, and innovation, as well as skills development for local people, to help build a future economy that benefits everyone.”
The new technique could be harnessed to improve how holes for sensors and cameras on smartphone screens are drilled and to increase the density of information on semiconductor chips, helping to keep up with the ever-increasing demand for more memory in devices.
Medical applications could include cancer surgery, where it is hoped more precise medical instruments could allow the resection of tumours without removing healthy surrounding tissue. In an academic partnership, the project’s research into this kind of medical application will be supported by Professor David Jayne at the University of Leeds.
In keeping with the National Robotarium’s focus on industry collaboration, researchers will work with three industrial partners, PowerPhotonic, Oxford Lasers and the G&H Group, to optimise the approach and final product for commercial application.
Dr Richard Carter, Assistant Professor of Applied Optics and Photonics at Heriot-Watt University and the project’s lead, said:
“Manufacturing is of key strategic importance to the UK, with a particular focus on high-tech and high-value manufacturing. This research will address the priority area of digital manufacturing, enabling a bespoke, rapid response capability for the first time. The new methods we are developing represent a paradigm shift in the capabilities of laser-based manufacturing, making it possible to move between 3D beam shapes with zero down-time, low cost and minimal technical know-how.
“Through collaboration with our industry partners, we’ll be able to develop the lasers in line with what industry needs, providing solutions to manufacturing challenges across a wide range of sectors. However, this technology could also support research in quantum technology, waveguide physics and the bio-sciences - anywhere where light must be controlled and manipulated.”
Suggested Items
Mycronic Receives Order for an SLX Mask Writer
04/11/2024 | MycronicMycronic AB has received an order for an SLX mask writer from a new customer in Asia. The order value is in the range of USD 7-9 million. Delivery of the system is planned for the second quarter of 2025.
Plastronics and the New IPC Guidelines for In-mold Electronics (IME)
04/11/2024 | Barry Matties, I-Connect007In the ever-evolving world of electronics, the roads for the integration of electronics assemblies into 3D structures continue to grow into a set of technologies used to produce 3D plastronics parts and revolutionize mainly the automotive industry. IPC has been developing standards for this set of technologies, led by Francisco Fourcade, IPC electronics technology standards manager.
MKS Introduces ESI Geode G2 CO2 Laser System for High- Precision and High-Speed HDI and mSap Via Drilling
04/09/2024 | MKS Instruments, Inc.MKS Instruments, Inc., a global provider of technologies that transform our world, today announced the official launch of the ESI Geode™ G2 laser drill system, the next generation of the Geode™ platform for processing PCB and ICP materials.
MKS’ Atotech, ESI to Participate in IPC APEX EXPO
03/29/2024 | MKS’ AtotechMKS’ Atotech and ESI will participate in this year’s IPC APEX EXPO 2024, the PCB industry’s largest event in North America, to be held in Anaheim, California, to be held from April 6-11 2024 at the Anaheim California Convention Center.
IPC APEX EXPO 2024: LPKF—Debunking Depaneling Industry Perceptions
03/27/2024 | Nolan Johnson, I-Connect007In this audio interview, listen to Jake Benz discuss advances in laser depaneling at LPKF. Thanks to advances in laser technology, perceptions about laser depaneling are changing from a low-speed, specialized process to a high volume process suitable for production manufacturing. Benz elaborates on some of the development and engineering that went into creating their latest, most capable depaneling machines.