AI Learns Physics to Optimize Particle Accelerator Performance
August 9, 2021 | Stanford UniversityEstimated reading time: 3 minutes
Machine learning, a form of artificial intelligence, vastly speeds up computational tasks and enables new technology in areas as broad as speech and image recognition, self-driving cars, stock market trading and medical diagnosis.
Before going to work on a given task, machine learning algorithms typically need to be trained on pre-existing data so they can learn to make fast and accurate predictions about future scenarios on their own. But what if the job is a completely new one, with no data available for training?
Now, researchers at the Department of Energy’s SLAC National Accelerator Laboratory have demonstrated that they can use machine learning to optimize the performance of particle accelerators by teaching the algorithms the basic physics principles behind accelerator operations – no prior data needed.
“Injecting physics into machine learning is a really hot topic in many research areas – in materials science, environmental science, battery research, particle physics and more,” said Adi Hanuka, a former SLAC research associate who led a study published in Physical Review Accelerator and Beams. This is one of the first examples of using physics-informed machine learning in the accelerator physics community.
Educating AI with physics
Accelerators are powerful machines that energize beams of electrons or other particles for use in a wide range of applications, including fundamental physics experiments, molecular imaging and radiation therapy for cancer. To obtain the best beam for a given application, operators need to tune the accelerator for peak performance.
When it comes to large particle accelerators this can be very challenging because there are so many components that need to be adjusted. What further complicates things is that not all components are independent, meaning that if you adjust one, it can affect the settings for another.
Recent studies at SLAC have shown that machine learning can greatly support human operators by speeding up the optimization process and finding useful accelerator settings that nobody has thought of before. Machine learning can also help diagnose the quality of particle beams without interfering with them, as other techniques usually do.
For these procedures to work, researchers first had to train the machine learning algorithms with data from previous accelerator operations, computer simulations that make assumptions about the accelerator’s performance, or both. However, they also found that using information from physics models combined with available experimental data could dramatically decrease the amount of new data required.
The new study demonstrates that prior data are, in fact, not needed if you know enough about the physics that describes how an accelerator works.
The team used this approach to tune SLAC’s SPEAR3 accelerator, which powers the lab’s Stanford Synchrotron Radiation Lightsource (SSRL). By using information obtained directly from physics-based models, they got results that were just as good, if not better, as those achieved by training the algorithm with actual archival data, the researchers said.
“Our results are the latest highlight of a progressive push at SLAC to develop machine learning tools for tuning accelerators,” said SLAC staff scientist Joe Duris, the study’s principal investigator.
Predicting the unknown
That’s not to say that pre-existing data are not helpful. They still come in handy even if you have your physics down. In the SPEAR3 case, the researchers were able to further improve the physics-informed machine learning model by pairing it with actual data from the accelerator. The team is also applying the method to improve tuning of SLAC’s Linac Coherent Light Source (LCLS) X-ray laser, one of the most powerful X-ray sources on the planet, for which archival data are available from previous experimental runs.
The full potential of the new method will probably become apparent when SLAC crews turn on LCLS-II next year. This superconducting upgrade to LCLS has a brand-new accelerator, and its best settings need to be determined from scratch. Its operators may find it convenient to have AI by their side that has already learned some basics of accelerator physics.
Funding came from a DOE Laboratory Directed Research and Development (LDRD) program at SLAC and DOE’s Office of Science (SC). LDRD and SC funded separate projects that both contributed to these results. Additional research contributions came from the University of Cambridge, UK. SSRL and LCLS are Office of Science user facilities.
Suggested Items
Kurtz Ersa to Offer Ersa VERSAFLOW 3 – Level ll Maintenance and Application
03/27/2024 | Kurtz ErsaKurtz Ersa Inc., a leading supplier of electronics production equipment, is pleased to announce upcoming training opportunities at its facility in Plymouth, WI.
Omron to Showcase Inspection and Factory Automation Solutions at IPC APEX EXPO 2024
03/18/2024 | OmronOMRON Automation Americas, a global leader in industrial automation solutions will be exhibiting at IPC APEX 2024, taking place at the Anaheim Convention Center from April 9th to April 11th. Attendees are invited to visit Omron's booth #2647 to hear how AI powers Omron’s latest technology, in addition to learning more about our newest X-Ray inspection machine, the VT-X850. This new 3D CT X-Ray inspection system is designed specifically for electric vehicle (EV) surface mount technology (SMT) manufacturing lines.
YAMAHA to Showcase Intelligent Factory Solutions at IPC APEX 2024
03/18/2024 | Yamaha RoboticsYamaha Motor Corporation’s Robotics Division will highlight an exciting array of new machines and technologies from April 9 – 11, 2024 at the IPC APEX 2024 trade show in the Anaheim Convention Center, Booth #2820.
Seika Machinery to Present Solutions to Optimize Production Processes at APEX 2024
03/12/2024 | Seika Machinery, Inc.Seika Machinery, Inc., a leading provider of advanced machinery, materials and engineering services, is gearing up to showcase its latest advancements at Booth 4012 during the 2024 IPC APEX EXPO, slated to take place April 9-11, 2024 at the Anaheim Convention Center in California.
Koh Young’s Joel Scutchfield to Showcase Data-driven Approach to Inspection at IPC APEX EXPO
03/12/2024 | Koh YoungKoh Young, the industry leader in True3D measurement-based inspection solutions and the Premier Sponsor of IPC APEX EXPO, invites electronics manufacturers to see its innovative data-driven approach to measurement-based inspection.