-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Growing Industry
In this issue of PCB007 Magazine, we talk with leading economic experts, advocacy specialists in Washington, D.C., and PCB company leadership to get a well-rounded picture of what’s happening in the industry today. Don’t miss it.
The Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
The Fabricator’s Guide to IPC APEX EXPO
This issue previews many of the important events taking place at this year's show and highlights some changes and opportunities. So, buckle up. We are counting down to IPC APEX EXPO 2024.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
The Growing Need for UHDI
November 30, 2022 | I-Connect007 Editorial TeamEstimated reading time: 3 minutes
Jan Pedersen of NCAB Group is deeply involved in IPC standards development surrounding ultra HDI and keeps his finger on the pulse of the industry surrounding this type of fabrication. With Asia still dominating this area, Jan sees the need for U.S. and European PCB fabricators to make the investment if they want to stay competitive.
Nolan Johnson: Jan, you’re very involved in UHDI design and manufacturing. What’s your perspective on these topics within the industry now, and where UHDI is going?
Jan Pedersen: There are seven to 10 factories globally that can produce what we call ultra HDI. The definition for UHDI is 50-micron and below track and gap. You can use subtractive methods down to, let’s say, 35 or 40 microns, and then when you creep down below that level you need mSAP or xSAP technologies.
That has been around for many years. It’s not really a new technology. It was introduced into the packaging or the component industry in the 1970s and ‘80s, but it was brought up again when Apple and others started to do smartphones. There are those factories that are involved in this, but they are factored for one customer, so it’s very hard for a smaller customer to get into UHDI, and most companies are smaller than Apple.
If you are a bit smaller, you don’t get access. It’s simple as that. I’ve tried it myself, tried to place an order with a big European PCB group that claims they have the capability. But when you have your Gerbers and your data and you want to produce boards there, they say, “Oh, sorry. This is basically for one customer,” and they don’t accept us putting their competitors, which could be anybody, into the same factory.
Johnson: Given that, what is driving the development of UHDI?
Pedersen: For us, it’s coming from telecom and 5G, and you assume we’ll see 6G. But quite a few of our customers come from these industries. We see that need growing in the automotive and medical industries, and I’m discussing it almost globally. I’m looking to see if there is any availability of production capabilities in the U.S. today. We don’t find it. There’s one factory in Europe that has limited capacity, and then the rest are in Asia and producing for the big names.
Johnson: Where does HDI stop and UHDI begin?
Pedersen: Let’s use the ultra HDI definition of 50 microns down. It’s subtractive down to approximately 40 microns.
Where we are today approximately on BGA pitch below 350 microns, we talk about pads of 140, and then you are basically into mSAP or substrate-like PCB technologies, whatever that is. There are quite a few technologies out there now that can be used. But we see that we are going from a subtractive into an mSAP level; this depends on where you are coming from and how far you are coming with the investments in your factory, because some of the factories that are producing mSAP have invested in imaging, AOI—everything needed for that resolution now.
When you have a subtractive in that factor, they can go quite far down here. But if you don’t have all the other investments and just go for mSAP, that doesn’t help you.
I’m saying this as background because you have this producibility level C in IPC-2226, where you have 50-micron track and gap. Everything below that is ultra HDI—substrate-like PCBs can be produced by either subtractive or SAP-related technologies. If you go below that again, down to 15 to 20 microns, you need an embedded trace substrate or similar technologies. Then of course you come to high-end IC substrates which are in single microns.
In the U.S. today for substrate-like PCB, it’s below 50 microns, not touching 20 microns, but maybe 35 or 40. When I had my Gerbers and asked for quotations, they said they couldn’t do it. They do have mSAP equipment, if you can call it that, or a process in-house, but have not yet invested in the imaging and AOI that is able to detect down to 20 microns. I think they stop somewhere around 35 today.
To read this entire conversation, which appeared in the November 2022 issue of PCB007 Magazine, click here.
Suggested Items
Alternative Manufacturing Inc. Awarded QML Requalification to IPC J-STD-001 and IPC-A-610
04/24/2024 | IPCIPC's Validation Services Program has awarded an IPC J-STD-001 and IPC-A-610 Qualified Manufacturers Listing (QML) requalification to Alternative Manufacturing Inc (AMI).
IPC Design Competition Champion Crowned at IPC APEX EXPO 2024
04/24/2024 | IPCAt IPC APEX EXPO 2024 in Anaheim, California, five competitors squared off to determine who was the best of the best at PCB design.
Big Win for Defense Production Act Budget Allocation in FY24 Budget
04/23/2024 | I-Connect007 Editorial TeamOne year ago, President Biden issued a determination that chips and packaging are critical for national security. Since that time, much work has been done to continue the conversation in Washington, elevating the importance of the entire chips value chain, and including printed circuit boards and substrates, without which chips cannot operate.
Real Time with... IPC APEX EXPO 2024: A Conversation with IPC's CEO: New Venue, Sustainability, and More
04/23/2024 | Real Time with...IPC APEX EXPOBarry Matties hosts Dr. John W. Mitchell, CEO of IPC, on the final day of IPC APEX EXPO 2024. They discuss the new venue in Anaheim and broach a range of topics, from traffic and booth experiences to workforce development, sustainability, and the CHIPS Act. And they offer advice for newcomers as IPC looks forward to an even better show experience next year.
Boeing's Janene Stinson Earns IPC Excellence in Education Award at IPC APEX EXPO 2024
04/22/2024 | IPCThe IPC Excellence in Education award was presented to Janene Stinson, Boeing, at IPC APEX EXPO 2024 in Anaheim, California, in recognition of her significant contributions to workforce development and leadership.