-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueOpportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
Manufacturing Know-how
For this issue, we asked our expert contributors to share their thoughts on the absolute “must-know” aspects of fab, assembly and test that all designers should understand. In the end, we’re all in this together.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Embedding Know-how Into Automation
April 6, 2023 | Barry Matties, I-Connect007Estimated reading time: 2 minutes
Michael Ford, senior director of emerging industry strategy for Aegis Software, speaks with Barry Matties on the topic of tribal knowledge, its pros and cons, and its role in our industry. While it may be useful if your team never changes, the inevitability of a person’s career progression means they take their knowledge with them. Michael brings his nuanced perspective to the conversation.
Michael, is tribal knowledge a friend or foe? What’s your initial reaction?
My initial reaction is that tribal knowledge is definitely a foe.
Why do you say that?
Manufacturing has long been dependent on a significant amount of legacy skills. These have accumulated over many years as we’ve gained experience and know-how across various technical areas of operations. But as our experts grow older, the younger people coming in behind them don’t have the opportunity to gain that same experience first-hand. We are, therefore, destined to lose the experience and know-how unless we can capture it somehow. Manufacturing cannot be sustainable if it continues to be dependent on that tribal knowledge.
Short of downloading somebody’s experience into a computer, and transferring it to another person, the more practical approach is to represent that know-how within software associated with machines and software solutions. Automation technology is developed using that know-how, so that key manufacturing dependencies on specific people are avoided. The value from that experience is easily realized in their choices of machines and software tools.
What I’m hearing is that tribal knowledge is valuable, but it will fade away unless we capture it.
There is a simple, but unfortunate pattern that emerges when we try to transfer knowledge from one person to another. Initially, you train someone to perform a certain role, and over time, they become absolute experts in what they do. The time comes, however, for them to move on. Everyone likes the opportunity for career progression. Their replacement must be trained. Will 100% of their knowledge and experience be transferred? No.
Some of that knowledge may not even be valid today, and that’s where it gets tricky.
The priority is always to transfer the part of the knowledge that is in use, relevant to the current operation, which represents a fraction of their total knowledge. The same cycle then repeats, reducing the amount of knowledge and know-how overall. This is a natural process, as there is limited time in which to do those transitions. The worst part is that the operation appears to be operating as required but is actually becoming totally inflexible. Those performing their tasks know less and less about why they’re doing it. They are only doing what they’ve been told and are not confident to deviate from that operation in any way because they don’t know the reasons behind the tasks. Inflexibility breeds inefficiency, because where there needs to be change and evolution in the way that things are done, the ability to adapt and optimize are simply no longer there.
To read this entire conversation, which appeared in the March 2023 issue of Design007 Magazine, click here.
Suggested Items
ASMPT to Exhibit Smart Manufacturing at IPC APEX EXPO 2024
03/27/2024 | ASMPTWith its innovative, data-driven Intelligent Factory concept and a comprehensive hardware and software portfolio around SMT production, market and innovation leader ASMPT will be a major presence at the IPC APEX EXPO 2024, the industry’s main event in California.
Intel Announces New Program for AI PC Software Developers and Hardware Vendors
03/27/2024 | Intel CorporationIntel Corporation announced the creation of two new artificial intelligence (AI) initiatives as part of the AI PC Acceleration Program: the AI PC Developer Program and the addition of independent hardware vendors to the program.
EV Tech OEM Indigo Technologies Closes Strategic Investment From Foxconn To Accelerate Its Smart EVs Solutions
03/25/2024 | PRNewswireIndigo Technologies, a robotics focused Smart EV OEM with breakthrough road sensing SmartWheels™ invented by team out of MIT, today announced it has received a strategic investment from Hon Hai Technology Group (Foxconn).
Being the Best Design Engineer
03/21/2024 | Andy Shaughnessy, Design007 MagazineDuring DesignCon 2024, I met with Bill Hargin, founder and CEO (Chief Everything Officer) of the stackup design software company Z-zero. In this interview, Bill discusses his stackup curriculum, what it takes to become a great design engineer, and why the best designers keep reading and challenging themselves constantly so they can stay on top of their game.
YAMAHA to Showcase Intelligent Factory Solutions at IPC APEX 2024
03/18/2024 | Yamaha RoboticsYamaha Motor Corporation’s Robotics Division will highlight an exciting array of new machines and technologies from April 9 – 11, 2024 at the IPC APEX 2024 trade show in the Anaheim Convention Center, Booth #2820.