-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueOpportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
Manufacturing Know-how
For this issue, we asked our expert contributors to share their thoughts on the absolute “must-know” aspects of fab, assembly and test that all designers should understand. In the end, we’re all in this together.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
IPC Design Competition Wrap-up
April 6, 2023 | I-Connect007 Editorial TeamEstimated reading time: 2 minutes
The IPC Design Competition took place during IPC APEX EXPO 2023, with five finalists competing—a far cry from the original 49 entries last fall. After the competition was over, we spoke with Kris Moyer, the IPC instructor who created the design used in the competition and served as a design advisor and judge for the event.
We asked Kris to give us a quick wrap-up of the competition, as well as his thoughts on this year’s design, which none of the finalists completed.
Andy Shaughnessy: Kris, would you give us a brief rundown on the design competition?
Kris Moyer: To provide a better challenge for our competitors, we added some additional levels of complexity over last year’s design. We had five finalists, three here at IPC APEX EXPO, plus the two finalists from our India branch. We ran them through the design yesterday, and we saw some very interesting designs. We came down to one clear winner, although I will say it was very close between the first and second place.
As far as complexity, this year we ended up with a multilayer rigid-flex board incorporating several more advanced complexities: sequential lamination, HDI, advanced packaging, controlled impedance, high-speed digital design, and power distribution design. Our competitors didn’t finish, but they showed a lot of excellent technique and capability.
Shaughnessy: Some said that they never worked with rigid-flex before.
Moyer: That’s right. Unlike last year, all the competitors this year were given the opportunity for a one- to two-hour individual session with me on Monday evening before the competition. I also provided a two-hour cram session where we reviewed not only the tool, but all the different features and technologies that we have to use. So, although they may never have routed rigid-flex before, I introduced them to it and some the issues they would be involved with.
Shaughnessy: Who was the winner?
Moyer: The winner was Sathishkumar Vijayakumar of Tessolve, one of our finalists from India. He did quite well in the work that he was able to complete. He showed good technique, complexity, and the broadest range of features and methodologies. Adam Thorvaldson of Innovex came in second. Adam also had a good amount of design complexity and features, so it was very close.
Kelly Dack: Kris, were these designs graded on manufacturability?
Moyer: Yes, that was one of the criteria, and we gave them some rules up front. The bulk of the design rules were provided to them already in the design because of the time limitations, but we said, “Here’s the range of via sizes you can make. You can make microvias for the BGA escape routing all the way up to larger, higher-current vias for the power distribution, etc.”
To read this entire conversation, which appeared in the March 2023 issue of Design007 Magazine, click here.
Suggested Items
SMTA’s Conducts First UHDI Symposium
03/29/2024 | Marcy LaRont, PCB007 MagazineSMTA’s first UHDI Symposium in Peoria, Arizona, on Tuesday, March 26 featured a standout full-day technical program with 11 separate presentations on what will be required for our companies to move to ultra HDI manufacturing. The event was the brainchild of Tara Dunn, SMTA director of training and education. It included a compelling and collaborative presentation by David Haboud of Altium, John Johnson of American Standards Circuits, and Chrys Shea of Shea Engineering, who had spent the past several weeks creating and building an appropriate SMT test board vehicle for UHDI, something that was passed around for all conference goers to see and touch.
PCBflow Helps Designers Choose Best Manufacturer for the Job
03/28/2024 | Andy Shaughnessy, Design007 MagazineI recently spoke with a few technologists who have first-hand experience with PCBflow: Susan Kayesar, technical product manager with Siemens; Evgeny Makhline, CTO of Nistec, a CEM based in Israel; and Peter Tranitz, senior director of technology solutions and leader of the IPC Design Initiative. They explain how PCBflow functions, from the designer’s and manufacturer’s viewpoint, and how this database helps break down the wall between these stakeholders.
Elementary, Mr. Watson: Ensuring Design Integrity
03/28/2024 | John Watson -- Column: Elementary, Mr. WatsonBack in February, many of us watched the "Big Game." It reminded me of the saying, “It's not how you start that is important, but rather how you finish." It is perfectly okay when you are talking about sports, you get off to a bad first half and need to recover in the second half. However, when it comes to PCB design, this is not a good practice. If things start badly, they usually don't recover. They continue down that same path, costing more money and losing design time.
Arrow Electronics Launches Intelligent Vision Ecosystem
03/27/2024 | BUSINESS WIREArrow Electronics, Inc. is utilizing the onsemi Imager Access System (IAS) module standard for developing intelligent vision solutions for use in robotics, machine vision, commercial cameras and other uses.
Dymax Will Exhibit Light-Cure Solutions for Today’s Electronics at IPC APEX 2024
03/26/2024 | DymaxDymax, a leading manufacturer of rapid and light-curing materials and equipment, will exhibit at the IPC APEX EXPO 2024 in Anaheim, CA, April 9-11.