-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Growing Industry
In this issue of PCB007 Magazine, we talk with leading economic experts, advocacy specialists in Washington, D.C., and PCB company leadership to get a well-rounded picture of what’s happening in the industry today. Don’t miss it.
The Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
The Fabricator’s Guide to IPC APEX EXPO
This issue previews many of the important events taking place at this year's show and highlights some changes and opportunities. So, buckle up. We are counting down to IPC APEX EXPO 2024.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
A High-Reliability, Stress-free Copper Deposit for FPC, Polyimide and Rigid-Flex
June 10, 2015 | J. Carver and A. Kucera, OM Group Electronic ChemicalsEstimated reading time: 2 minutes
Today’s wide variety of laminate materials and specialized dielectric choices pose a challenge for process engineering. In particular, smooth surfaces, such as polyimide, flex circuit substrates and rigid-flex constructions with window cut-outs, can be a challenge for electroless copper and plating processes. Conventional electroless copper systems often required pretreatments with hazardous chemicals or have a small process window to achieve a uniform coverage without blistering. To overcome the challenge of metallizing smooth surfaces, a new stress-free electroless copper was developed to serve this important sector of the printed circuit industry.
Introduction
As the thermal, physical, chemical and electrical properties of PCBs have advanced, so too have the substrates of construction. With a wide variety of substrates available, it is becoming increasingly difficult to accommodate these new substrates in current manufacturing processes[1]. Polyimide resins (PI), for example, provide exceptional thermal and chemical stability but remain challenging with industry standard processes.
In particular, electroless copper deposition, the most commonly used method of metallizing a nonconductive substrate, is susceptible to blistering or peeling due to the low adhesion of the copper film to the substrate. Typically, electroless copper films require mechanical anchoring to provide adhesion to a substrate to prevent blistering. A roughened surface is commonly created with a chemical or plasma etch process to help create anchoring sites.
Conventional chemical etches, which were primarily designed for epoxy substrates, are generally ineffective at activating PI substrates. Plasma etching, which is effective at etching PI, is still insufficient to prevent peeling and blistering. Some manufacturing processes have resorted to using an alkaline solution containing hydrazine. While this can be effective at improving adhesion of electroless copper films, hydrazine is extremely hazardous and challenging to handle safely. In addition, many material types, such as those that contain adhesive bonding layers, are incompatible with strong alkaline solutions.
Due to the fact that most surface treatments are ineffective, or not practical or compatible in some situations, it is critical that the electroless copper process provides a significantly wide processing window to alleviate blistering defects and accommodate a variety of substrate types.
The most common commercially available electroless copper plating solutions are not designed to meet these requirements. It is known that blistering and peeling of the copper deposit is also a function of the internal stress and strain of the deposit and that additives can be included in an electroless copper solution that affect the properties of the resulting electroless copper deposits (5–7). However, inclusion of additives may affect PCB reliability and careful selection is necessary. In this study, we evaluate select additives in an electroless copper system for their influence on the deposit stress and, ultimately, their effect on the reliability of a PCB by thermal shock and interconnect stress test (IST).
Editor's Note: This article originally appeared in the June 2015 issue of The PCB Magazine.
Suggested Items
Insulectro’s 'Storekeepers' Extend Their Welcome to Technology Village at IPC APEX EXPO
04/03/2024 | InsulectroInsulectro, the largest distributor of materials for use in the manufacture of PCBs and printed electronics, welcomes attendees to its TECHNOLOGY VILLAGE during this year’s IPC APEX EXPO at the Anaheim Convention Center, April 9-11, 2024.
ENNOVI Introduces a New Flexible Circuit Production Process for Low Voltage Connectivity in EV Battery Cell Contacting Systems
04/03/2024 | PRNewswireENNOVI, a mobility electrification solutions partner, introduces a more advanced and sustainable way of producing flexible circuits for low voltage signals in electric vehicle (EV) battery cell contacting systems.
Heavy Copper PCBs: Bridging the Gap Between Design and Fabrication, Part 1
04/01/2024 | Yash Sutariya, Saturn Electronics ServicesThey call me Sparky. This is due to my talent for getting shocked by a variety of voltages and because I cannot seem to keep my hands out of power control cabinets. While I do not have the time to throw the knife switch to the off position, that doesn’t stop me from sticking screwdrivers into the fuse boxes. In all honesty, I’m lucky to be alive. Fortunately, I also have a talent for building high-voltage heavy copper circuit boards. Since this is where I spend most of my time, I can guide you through some potential design for manufacturability (DFM) hazards you may encounter with heavy copper design.
Trouble in Your Tank: Supporting IC Substrates and Advanced Packaging, Part 5
03/19/2024 | Michael Carano -- Column: Trouble in Your TankDirect metallization systems based on conductive graphite or carbon dispersion are quickly gaining acceptance worldwide. Indeed, the environmental and productivity gains one can achieve with these processes are outstanding. In today’s highly competitive and litigious environment, direct metallization reduces costs associated with compliance, waste treatment, and legal issues related to chemical exposure. What makes these processes leaders in the direct metallization space?
AT&S Shines with Purest Copper on World Recycling Day
03/18/2024 | AT&SThe Styrian microelectronics specialist AT&S is taking World Recycling Day as an opportunity to review the progress that has been made in recent months at its sites around the world in terms of the efficient use of resources: