Wearable Sensor Can Detect Deadly Gases and UV Radiation
June 11, 2015 | RMIT UniversityEstimated reading time: 1 minute
RMIT University researchers have created wearable sensor patches that detect harmful UV radiation and dangerous, toxic gases such as hydrogen and nitrogen dioxide.
These transparent, flexible electronics – which can be worn as skin patches or incorporated into clothing - are bringing science fiction gadgets closer to real life.
Dr Madhu Bhaskaran, project leader and co-leader of the RMIT Functional Materials and Microsystems Research Group, said the sensors can be placed on work and safety gear to detect dangerous gases.
“Hydrogen leaks can lead to explosions as happened with the Hindenburg disaster and nitrogen dioxide is a major contributor to smog,” she said.
“The ability to monitor such gases in production facilities and coal-fired power stations gives vital early warning of explosions, while the ability to sense nitrogen dioxide allows for a constant monitoring of pollution levels in crowded cities.”
The latest development follows RMIT’s MicroNano Research Facility breakthrough in bendable electronics which has paved the way for flexible mobile phones.
Lead author, PhD researcher Philipp Gutruf, says the unbreakable, stretchy electronic sensors are also capable of detecting harmful levels of UV radiation known to trigger melanoma.
Much like a nicotine patch, they can be worn on the skin. In future, they will be able to link to electronic devices to continuously monitor UV-levels and alert the user when radiation hits harmful levels.
Gutruf said the research used zinc oxide - present in most sunscreens as a fine powder mixed into a lotion - as the UV sensing material.
Zinc oxide was used in the form of very thin coatings over a hundred times thinner than a sheet of paper.
“This thin zinc oxide layer is engineered with a plate-like structure that we call micro-tectonics, these plates can slide across each other bit like geological plates that form the earth’s crust allowing for high sensitivity and the ability to bend and flex the devices,” he said.
Dr Bhaskaran said the sensors are cheap and durable – attributes which will see flexible electronics and sensors become an integral part of everyday life.
The research, which has just been published in leading micro/nano-science journal Small, was supported by the Australian Research Council.
Suggested Items
Book Excerpt: The Printed Circuit Assembler’s Guide to... Factory Analytics
04/24/2024 | I-Connect007 Editorial TeamIn our fast-changing, deeply competitive, and margin-tight industry, factory analytics can be the key to unlocking untapped improvements to guarantee a thriving business. On top of that, electronics manufacturers are facing a tremendous burden to do more with less. If you don't already have a copy of this book, what follows is an excerpt from the introduction chapter of 'The Printed Circuit Assembler’s Guide to... Factory Analytics: Unlocking Efficiency Through Data Insights' to whet your appetite.
Listen Up! The Intricacies of PCB Drilling Detailed in New Podcast Episode
04/25/2024 | I-Connect007In episode 5 of the podcast series, On the Line With: Designing for Reality, Nolan Johnson and Matt Stevenson continue down the manufacturing process, this time focusing on the post-lamination drilling process for PCBs. Matt and Nolan delve into the intricacies of the PCB drilling process, highlighting the importance of hole quality, drill parameters, and design optimization to ensure smooth manufacturing. The conversation covers topics such as drill bit sizes, aspect ratios, vias, challenges in drilling, and ways to enhance efficiency in the drilling department.
Elevating PCB Design Engineering With IPC Programs
04/24/2024 | Cory Blaylock, IPCIn a monumental stride for the electronics manufacturing industry, IPC has successfully championed the recognition of the PCB Design Engineer as an official occupation by the U.S. Department of Labor (DOL). This pivotal achievement not only underscores the critical role of PCB design engineers within the technology landscape, but also marks the beginning of a transformative journey toward nurturing a robust, skilled workforce ready to propel our industry into the future.
Winner of The Science Show Rakett 69 Receives Incap Scholarship
04/24/2024 | IncapThe winner of the Rakett 69 science show, Andri Türkson, who stood out as an electronics enthusiast, received a scholarship from Incap Estonia, along with an internship opportunity in Saaremaa.
Alternative Manufacturing Inc. Awarded QML Requalification to IPC J-STD-001 and IPC-A-610
04/24/2024 | IPCIPC's Validation Services Program has awarded an IPC J-STD-001 and IPC-A-610 Qualified Manufacturers Listing (QML) requalification to Alternative Manufacturing Inc (AMI).