Share on:

Share on LinkedIn Share on X Share on Facebook Share with email

Suggested Items

SMTA’s Conducts First UHDI Symposium

03/29/2024 | Marcy LaRont, PCB007 Magazine
SMTA’s first UHDI Symposium in Peoria, Arizona, on Tuesday, March 26 featured a standout full-day technical program with 11 separate presentations on what will be required for our companies to move to ultra HDI manufacturing. The event was the brainchild of Tara Dunn, SMTA director of training and education. It included a compelling and collaborative presentation by David Haboud of Altium, John Johnson of American Standards Circuits, and Chrys Shea of Shea Engineering, who had spent the past several weeks creating and building an appropriate SMT test board vehicle for UHDI, something that was passed around for all conference goers to see and touch.

PCBflow Helps Designers Choose Best Manufacturer for the Job

03/28/2024 | Andy Shaughnessy, Design007 Magazine
I recently spoke with a few technologists who have first-hand experience with PCBflow: Susan Kayesar, technical product manager with Siemens; Evgeny Makhline, CTO of Nistec, a CEM based in Israel; and Peter Tranitz, senior director of technology solutions and leader of the IPC Design Initiative. They explain how PCBflow functions, from the designer’s and manufacturer’s viewpoint, and how this database helps break down the wall between these stakeholders.

Elementary, Mr. Watson: Ensuring Design Integrity

03/28/2024 | John Watson -- Column: Elementary, Mr. Watson
Back in February, many of us watched the "Big Game." It reminded me of the saying, “It's not how you start that is important, but rather how you finish." It is perfectly okay when you are talking about sports, you get off to a bad first half and need to recover in the second half. However, when it comes to PCB design, this is not a good practice. If things start badly, they usually don't recover. They continue down that same path, costing more money and losing design time.  

Arrow Electronics Launches Intelligent Vision Ecosystem

03/27/2024 | BUSINESS WIRE
Arrow Electronics, Inc. is utilizing the onsemi Imager Access System (IAS) module standard for developing intelligent vision solutions for use in robotics, machine vision, commercial cameras and other uses.

Dymax Will Exhibit Light-Cure Solutions for Today’s Electronics at IPC APEX 2024

03/26/2024 | Dymax
Dymax, a leading manufacturer of rapid and light-curing materials and equipment, will exhibit at the IPC APEX EXPO 2024 in Anaheim, CA, April 9-11.
Copyright © 2024 I-Connect007 | IPC Publishing Group Inc. All rights reserved. Log in