-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Growing Industry
In this issue of PCB007 Magazine, we talk with leading economic experts, advocacy specialists in Washington, D.C., and PCB company leadership to get a well-rounded picture of what’s happening in the industry today. Don’t miss it.
The Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
The Fabricator’s Guide to IPC APEX EXPO
This issue previews many of the important events taking place at this year's show and highlights some changes and opportunities. So, buckle up. We are counting down to IPC APEX EXPO 2024.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
dalTools to Showcase Design Tools at PCB West 2015
September 8, 2015 | dalToolsEstimated reading time: 1 minute
dalTools will be exhibiting at this year's PCB West, which will be held at the Santa Clara Convention Center in Santa Clara, California. The conference will be held September 15-17, while the exposition will be held on September 16.
"dalTools makes PCB design easier. In fact we like to say that dalTools and Allegro are best friends. They both work well together throughout the enterprise," said Dal Locke, president and CEO of dalTools. "For the PCB Designer, dalTools extends many of the existing Allegro commands to be more capable of doing complex tasks. (Such as dealing with BackDrill technology and matched length routing of diff pairs). For the circuit design engineer, it adds seven new commands to DE HDL so engineers can create schematics faster with less errors. It gives the EE the ability to view the Allegro library, place critical parts from the schematic, more easily deal with Constraint Manager DRCs and graphically compare one rev of the board to another, layer by layer, to make sure critical circuits were not disturbed."
For the technician in the factory, it enhances the Allegro viewer so it is easier to use and that more information is available with less keystrokes, Locke noted.
"We used to sell only to PCB designers, but now offer solutions to EEs (EE-ToolKit) and Technicians (BoardView) as well," said Locke. "We invite all interested to stop by our booth and watch our products in action!"
About dalTools
Our mission is to make PCB design easier, more productive and fun! Our goal is to automate as many manual and mundane tasks and processes as possible. Many Fortune 500 companies have purchased and are already utilizing these tools to gain competitive advantages by making dramatic improvements in quality and productivity.
We started this business after years of designing printed circuit boards for large corporations. We have seen the tools and technology change greatly over the years.
We are constantly upgrading our software and adding new applications. We look forward to benefiting and serving our customers with even more solutions.
For more information for to www.daltools.com.
Suggested Items
KIC’s Miles Moreau to Present Profiling Basics and Best Practices at SMTA Wisconsin Chapter PCBA Profile Workshop
01/25/2024 | KICKIC, a renowned pioneer in thermal process and temperature measurement solutions for electronics manufacturing, announces that Miles Moreau, General Manager, will be a featured speaker at the SMTA Wisconsin Chapter In-Person PCBA Profile Workshop.
The Drive Toward UHDI and Substrates
09/20/2023 | I-Connect007 Editorial TeamPanasonic’s Darren Hitchcock spoke with the I-Connect007 Editorial Team on the complexities of moving toward ultra HDI manufacturing. As we learn in this conversation, the number of shifting constraints relative to traditional PCB fabrication is quite large and can sometimes conflict with each other.
Standard Of Excellence: The Products of the Future
09/19/2023 | Anaya Vardya -- Column: Standard of ExcellenceIn my last column, I discussed cutting-edge innovations in printed circuit board technology, focusing on innovative trends in ultra HDI, embedded passives and components, green PCBs, and advanced substrate materials. This month, I’m following up with the products these new PCB technologies are destined for. Why do we need all these new technologies?
Experience ViTrox's State-of-the-Art Offerings at SMTA Guadalajara 2023 Presented by Sales Channel Partner—SMTo Engineering
09/18/2023 | ViTroxViTrox, which aims to be the world’s most trusted technology company, is excited to announce that our trusted Sales Channel Partner (SCP) in Mexico, SMTo Engineering, S.A. de C.V., will be participating in SMTA Guadalajara Expo & Tech Forum. They will be exhibiting in Booth #911 from the 25th to the 26th of October 2023, at the Expo Guadalajara in Jalisco, Mexico.
Intel Unveils Industry-Leading Glass Substrates to Meet Demand for More Powerful Compute
09/18/2023 | IntelIntel announced one of the industry’s first glass substrates for next-generation advanced packaging, planned for the latter part of this decade.