-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Design Strategies for Success—and Profit
May 9, 2016 | Gary Griffin, Fast InterconnectEstimated reading time: 1 minute
In today’s economic environment, making money on a project is getting more and more challenging. Those years when businesses like mine were practically printing money are long gone.
The Good Ol’ Days
If you are under 30 years old, you probably do not have this point of reference; it’s been one downturn after another for your entire adult life. But for us older folks, times were really good back then. So, what happened?
You happened, as well as a million others like you, or so it seems. In other words, the market is a little cramped now and much more competitive, which dilutes our profit per project. And if you’re old school and have not grown into the here and now, you will always feel the profit pinch.
There was a time when PCB designers could name their price and people would pay it, primarily because their PCB design choices were limited. This is not true anymore. Now, you can’t throw a rock without hitting a PCB designer, or at least someone who thinks he knows how to design a board.
This is the competition we all face, and it’s the reason it is so difficult to justify our prices. We’re competing with every designer sitting in a home office in his shorts, drinking coffee and eating toaster pastries, while undercutting us by as much as 50%. Customers are driven by their own profit goals, and a low-ball quote is attractive when they really don’t understand the real cost of using cut-rate resources.
So how do we make more money while saving money for our customers? After all, the only reason to be in business is to make money, and that is a two-way street. Vendor and customer relationships go both ways. We provide a service that has value so they can provide a product that has value.
OEMs use companies like mine because they don’t want the overhead of supporting an in-house design engineering department. That was not the case 15 years ago. Seemed like everyone wanted to capture the engineering in-house. However, when business slowed down, this first thing many OEMs did was push us out the door because they did not know the value of the work we did.
To read this entire article, which appeared in the March 2016 issue of The PCB Design Magazine, click here.
Suggested Items
KIC’s Miles Moreau to Present Profiling Basics and Best Practices at SMTA Wisconsin Chapter PCBA Profile Workshop
01/25/2024 | KICKIC, a renowned pioneer in thermal process and temperature measurement solutions for electronics manufacturing, announces that Miles Moreau, General Manager, will be a featured speaker at the SMTA Wisconsin Chapter In-Person PCBA Profile Workshop.
The Drive Toward UHDI and Substrates
09/20/2023 | I-Connect007 Editorial TeamPanasonic’s Darren Hitchcock spoke with the I-Connect007 Editorial Team on the complexities of moving toward ultra HDI manufacturing. As we learn in this conversation, the number of shifting constraints relative to traditional PCB fabrication is quite large and can sometimes conflict with each other.
Standard Of Excellence: The Products of the Future
09/19/2023 | Anaya Vardya -- Column: Standard of ExcellenceIn my last column, I discussed cutting-edge innovations in printed circuit board technology, focusing on innovative trends in ultra HDI, embedded passives and components, green PCBs, and advanced substrate materials. This month, I’m following up with the products these new PCB technologies are destined for. Why do we need all these new technologies?
Experience ViTrox's State-of-the-Art Offerings at SMTA Guadalajara 2023 Presented by Sales Channel Partner—SMTo Engineering
09/18/2023 | ViTroxViTrox, which aims to be the world’s most trusted technology company, is excited to announce that our trusted Sales Channel Partner (SCP) in Mexico, SMTo Engineering, S.A. de C.V., will be participating in SMTA Guadalajara Expo & Tech Forum. They will be exhibiting in Booth #911 from the 25th to the 26th of October 2023, at the Expo Guadalajara in Jalisco, Mexico.
Intel Unveils Industry-Leading Glass Substrates to Meet Demand for More Powerful Compute
09/18/2023 | IntelIntel announced one of the industry’s first glass substrates for next-generation advanced packaging, planned for the latter part of this decade.