Commercialization of Micro-LED Could Consume 50% of Current Global LED Capacity
September 15, 2016 | TrendForceEstimated reading time: 2 minutes
Micro-LED is regarded as a promising next-generation display technology that is being quietly developed by major brand companies in various industries. According to LEDinside, a division of TrendForce, displays for wearable devices and large indoor public displays are two applications that offer micro-LED the quickest paths to commercialization.
Furthermore, LEDinside estimates that having all wearable devices and indoor public displays on the market to switch to micro-LED would consume as much as 50% of the current LED production capacity worldwide.
“Typically, developers of new display technologies would first create solutions for small-size display applications,” said LEDinside analyst Philip Chang. “They eventually transfer their technologies to displays of larger sizes as they overcome problems related to the yield rate and cost. However, micro-LED’s two potential applications are at the opposite ends of the size spectrum. On one hand, wearable devices such as smartwatches have the smallest displays around. On the other hand, we have the extremely large indoor public displays.”
Chang furthermore pointed out the development of micro-LED is very different from other display technologies: “Micro-LED combines the pixel and the light source together into one package. Therefore, specifications and product development for this technology will depend on sizes and volumes of pixels needed for various applications. Small-size displays have the advantage of having lower pixel volumes. Displays of wearable devices, for example, are usually smaller than a two-inch silicon wafer. Micro-LED solutions for this applications even allows for the wafer bonding process, which simplifies the LED manufacturing process and lower the technology barriers for LED suppliers.”
Adoption of micro-LED in large-size display applications has an advantage of products having lower pixel densities (as expressed in pixels per inch or PPI). Micro-LED solutions for large-size but low PPI displays do not need to significantly scale down their LED packages. However, the LED usage volume for micro-LED display increases with the size of the screen panel, and the technology is currently not mature enough to be transferred to large-size applications.
“Having several smaller micro-LED display modules connected together to form one giant screen could bypass the need to mass produce large single-panel displays,” noted Chang. “At the same time, this method also reduces LED usage volume and addresses the yield rate issue associated with increasing the display size. Theoretically, large indoor micro-LED display systems based this “connected structure” design will likely become practical products sooner than wearable devices with micro-LED displays.
Currently, Taiwanese companies that are focusing on the R&D of micro-LED include Epistar, PlayNitride, Industrial Technology Research Institute, AU Optronics and Innolux. Providing a complete supply chain solution would be developmental advantage for Taiwanese micro-LED display manufacturers. Major international branded electronics makers and LED suppliers such as Samsung, LG, Nichia, Sharp and Sony are also very active in the field. Among them, the leaders in terms of transferring the technology to end applications are LuxVue, which was acquired by Apple, and X-Celeprint, which spun off from the University of Illinois.
LEDinside is proud to present LEDforum 2016 at National Taiwan University Hospital (NTUH) International Convention Center on September 30. This event will feature detailed presentations on the micro-LED supply chain, including materials, manufacturing process, system integration, end-use applications and market trends. We cordially invite industry representatives and friends in the media to take advantage of this opportunity and participate in the conference.
Suggested Items
Koh Young Showcases Award-winning Inspection Solutions at SMTconnect with SmartRep in Hall 4A.225
04/25/2024 | Koh Young TechnologyKoh Young Technology, the industry leader in True 3D measurement-based inspection solutions, will showcase an array of award-winning inspection and measurement solutions at SMTconnect alongside its sales partner, SmartRep, in booth 4A.225 at NürnbergMesse from June 11-13, 2023. The following offers a glimpse into what Koh Young will present at the tradeshow:
Real Time with… IPC APEX EXPO 2024: Plasmatreat: Innovative Surface Preparation Solutions
04/25/2024 | Real Time with...IPC APEX EXPOIn this interview, Editor Nolan Johnson speaks with Hardev Grewal, CEO and president of Plasmatreat, a developer of atmospheric plasma solutions. Plasmatreat uses clean compressed air and electricity to create plasma, offering environmentally friendly methods for surface preparation. Their technology measures plasma density for process optimization and can remove organic micro-contamination. Nolan and Hardev also discuss REDOX-Tool, a new technology for removing metal oxides.
Nanotechnology Market to Surpass $53.51 Billion by 2031
04/25/2024 | PRNewswireSkyQuest projects that the nanotechnology market will attain a value of USD 53.51 billion by 2031, with a CAGR of 36.4% over the forecast period (2024-2031).
Cadence, TSMC Collaborate on Wide-Ranging Innovations to Transform System and Semiconductor Design
04/25/2024 | Cadence Design SystemsCadence Design Systems, Inc. and TSMC have extended their longstanding collaboration by announcing a broad range of innovative technology advancements to accelerate design, including developments ranging from 3D-IC and advanced process nodes to design IP and photonics.
SMC Korea 2024 to Highlight Semiconductor Materials Trends and Innovations on Industry’s Path to $1 Trillion
04/24/2024 | SEMIWith Korea a major consumer of semiconductor materials and advanced materials a key driver of innovation on the industry’s path to $1 trillion, industry leaders and experts will gather at SMC (Strategic Materials Conference) Korea 2024 on May 29 at the Suwon Convention Center in Gyeonggi-do, South Korea to provide insights into the latest materials developments and trends. Registration is open.